CN

Main Business

Home > Main Business > Non-coal backfill system

Non-coal backfill system Complete Set of Coal Mine Backfill System High-Tech Mining Systems and Equipment Intelligent Control System New Material After-sales Service Filling system operation

Horizontal Twin Shaft Blade Mixer

This equipment is the core product of paste mixing system, it is a high efficient mixer, especially suitable for handling coarse aggregate mixture. It is mainly used in high concentration tailing backfill system, and also can be used in construction, public (railway) road, bridge and other industries.

Stable performance Large mixing volume Good mixing effect Continuous feeding and discharging low noise easy maintenance

consulting
  • Product advantage
  • Technical parameter

● Excellent mixing effect:
The mixing arms and blades undergo relative reverse rotation of the two staggered mixing shafts to ensure that the material generates violent mixing movement in the vertical and horizontal directions,forming a forced meandering mixing and feeding.

● High-efficiency sealing:

Adopting floating oil sealing ring and special seals with pressure grease to form a multi-layer labyrinth sealing structure,with better sealing effect.It effectively solves the technical problem of slurry leakage at the shaft end which is common in the industry.



● Low grease consumption:
Adopting centralized automatic lubrication device, PLC precise control, quantitative addition, grease lubrication for the four shaft end sealing points of the mixer.

● Good transmission stability:
 Belt drive with elastic coupling can make up for the manufacturing and assembly tolerances and reduce the running impact, with stable operation and easy installation and maintenance.

● Long service life:
 The mixing blades and the arc plate of the mixing tank are made of high-strength wear-resistant steel plate, with long service life.

● Good serviceability:
The large-size access door is convenient for maintenance and cleaning;the one-piece disassembled shaft end structure makes it easier to replace the shaft end seal;the mixing section can be disassembled and replaced individually,which is low maintenance cost.

● High level of ergonomics:
The access door is equipped with a safety control device to ensure that the mixer will not be accidentally started during maintenance;the fully sealed cover plate effectively prevents material splashing and dust;the tank is equipped with an automatic high-pressure water cleaning system,which greatly reduces the workload of manual cleaning.


Project

Parameter

Mixing materials

Mineral mixtures, cement-stabilized gravel base concrete, backfill sealants, concrete, dry mixtures, etc

Solids content

50%～85%

Slump(cm)

20～28

Model

JSL4000

JSL6000

JSL8000

JSL1000

JSL12000

JSL14000

JSL16000

JSL18000

Theoretical yield（m3/h）

120

180

240

300

360

420

480

540

Rotate speed（rpm）

53

47

42

42

37

37

37

37

Stirring circle diameter（mm）

740

840

980

1100

1240

1300

1360

1440

Blend segment length（mm）

4000

4270

4480

4490

4720

4850

5000

5000

Maximum aggregate particle size（mm）

30

30

30

30

30

30

30

30

Motor power(kW)

2×30

2×45

2×55

2×75

2×90

2×110

2×132

2×160

Noltage(V)

380/660

Quality(t)

≈8

≈10

≈11

≈12

≈15

≈18

≈21

≈24.5


All of the above manuals apply to standard specifications. 
The technical parameters of the customer-specific specifications may deviate from the data in the table above. 
All technical parameters will be updated according to the research and development situation, and our company reserves the right to change at any time.


Product description

This equipment is the core product of paste mixing system, it is a high efficient mixer, especially suitable for handling coarse aggregate mixture. It is mainly used in high concentration tailing backfill system, and also can be used in construction, public (railway) road, bridge and other industries.

Product advantage

● Excellent mixing effect:
The mixing arms and blades undergo relative reverse rotation of the two staggered mixing shafts to ensure that the material generates violent mixing movement in the vertical and horizontal directions,forming a forced meandering mixing and feeding.

● High-efficiency sealing:

Adopting floating oil sealing ring and special seals with pressure grease to form a multi-layer labyrinth sealing structure,with better sealing effect.It effectively solves the technical problem of slurry leakage at the shaft end which is common in the industry.



● Low grease consumption:
Adopting centralized automatic lubrication device, PLC precise control, quantitative addition, grease lubrication for the four shaft end sealing points of the mixer.

● Good transmission stability:
 Belt drive with elastic coupling can make up for the manufacturing and assembly tolerances and reduce the running impact, with stable operation and easy installation and maintenance.

● Long service life:
 The mixing blades and the arc plate of the mixing tank are made of high-strength wear-resistant steel plate, with long service life.

● Good serviceability:
The large-size access door is convenient for maintenance and cleaning;the one-piece disassembled shaft end structure makes it easier to replace the shaft end seal;the mixing section can be disassembled and replaced individually,which is low maintenance cost.

● High level of ergonomics:
The access door is equipped with a safety control device to ensure that the mixer will not be accidentally started during maintenance;the fully sealed cover plate effectively prevents material splashing and dust;the tank is equipped with an automatic high-pressure water cleaning system,which greatly reduces the workload of manual cleaning.


Technical parameter

Project

Parameter

Mixing materials

Mineral mixtures, cement-stabilized gravel base concrete, backfill sealants, concrete, dry mixtures, etc

Solids content

50%～85%

Slump(cm)

20～28

Model

JSL4000

JSL6000

JSL8000

JSL1000

JSL12000

JSL14000

JSL16000

JSL18000

Theoretical yield（m3/h）

120

180

240

300

360

420

480

540

Rotate speed（rpm）

53

47

42

42

37

37

37

37

Stirring circle diameter（mm）

740

840

980

1100

1240

1300

1360

1440

Blend segment length（mm）

4000

4270

4480

4490

4720

4850

5000

5000

Maximum aggregate particle size（mm）

30

30

30

30

30

30

30

30

Motor power(kW)

2×30

2×45

2×55

2×75

2×90

2×110

2×132

2×160

Noltage(V)

380/660

Quality(t)

≈8

≈10

≈11

≈12

≈15

≈18

≈21

≈24.5


All of the above manuals apply to standard specifications. 
The technical parameters of the customer-specific specifications may deviate from the data in the table above. 
All technical parameters will be updated according to the research and development situation, and our company reserves the right to change at any time.


Cone valve pist..
High-concentrat..