Tel
86+073187807568
Phone
Phone
Business Consulting:
86+073187807568After-sales service:
Headquarters Address:
Feny Industrial Park, Chuangye Avenue, National Economic and Technological Development Zone, Ningxiang City, Hunan Province
Home > Main Business > High-Tech Mining Systems and Equipment
This product is the core component of the grouting system, suitable for tunnel and mining applications. It pumps materials through pipelines to the destination for grouting operations. It is used for pumping fine particles and viscous materials, such as various concentrations of tailings slurry, municipal sludge, coal slurry, and other materials. The slurry material requires a slump within the range of ≥15cm, with a maximum aggregate size of 5mm. It can handle materials with a solid content ratio of 50% to 85%, including tailings slurry, fly ash paste, red mud, sludge, and coal slurry, with a pH range of 6 to 9.5.
Easy maintenance strong versatility.
|
Rated outlet pressure |
MPa |
6.25 |
|
Main cylinder steel diameter/rod diameter-stroke |
mm |
φ100/63-550 |
|
Bore of the conveying cylinder |
mm |
DN200 |
|
Dispense valve form |
Cone Distributor Valve (Poppet Valve) |
|
|
Maximum pumping frequency |
次/min |
5.1 |
|
Dimensions (length×width×height)mm |
|
3147×764×917 |
|
Discharge port diameter |
mm |
DN50 |
|
Inlet diameter |
mm |
DN100 |
|
Allowable range of slump |
cm |
≥15 |
|
Maximum aggregate particle size |
mm |
6 |
This product is the core component of the grouting system, suitable for tunnel and mining applications. It pumps materials through pipelines to the destination for grouting operations. It is used for pumping fine particles and viscous materials, such as various concentrations of tailings slurry, municipal sludge, coal slurry, and other materials. The slurry material requires a slump within the range of ≥15cm, with a maximum aggregate size of 5mm. It can handle materials with a solid content ratio of 50% to 85%, including tailings slurry, fly ash paste, red mud, sludge, and coal slurry, with a pH range of 6 to 9.5.
|
Rated outlet pressure |
MPa |
6.25 |
|
Main cylinder steel diameter/rod diameter-stroke |
mm |
φ100/63-550 |
|
Bore of the conveying cylinder |
mm |
DN200 |
|
Dispense valve form |
Cone Distributor Valve (Poppet Valve) |
|
|
Maximum pumping frequency |
次/min |
5.1 |
|
Dimensions (length×width×height)mm |
|
3147×764×917 |
|
Discharge port diameter |
mm |
DN50 |
|
Inlet diameter |
mm |
DN100 |
|
Allowable range of slump |
cm |
≥15 |
|
Maximum aggregate particle size |
mm |
6 |
Scan code attention
